SKF 6310/C3 Single Row Ball Bearings

C0:20.8 kN; d:41.28 mm; s1:20.6 mm; Designation of bearing:US209-26G2T20; H1:20 mm; H2:108 mm; L:190 mm; T min.:-20 °C; N1:23 mm; Recommended tightening torque for set screw:8 Nm;

Characteristic cage frequency, FTF:0.44 Hz; Mass:0.03 kg; C0r:34 kN; Cr:22 kN; Lubrication hole on outer ring:Non/No; Nlim (oil):12,000 rpm; Nlim (grease):8,000 rpm; Characteristic inner ring frequency, BPFI:9.44 Hz; C:25 mm; Max operating temperature, Tmax:120 °C;

Designation of bearing:UC205-15G2T20; A:38 mm; L:84 mm; H1:12 mm; d:23.81 mm; T max.:200 °C; B:34 mm; Recommended tightening torque for set screw:3.7 Nm; Designation of housing:PA205-; C:14 kN;

T min.:-40 °C; Z:62.8 mm; A1:18 mm; B:55.6 mm; Recommended tightening torque for set screw:16.8 Nm; A2:58.4 mm; J:130 mm; Weight:3.44 kg; L:162 mm; T max.:100 °C;

T min.:-40 °C; B1:56.3 mm; H2:107 mm; Designation of housing:PE209-; d1:62 mm; Weight:2.37 kg; B:42.8 mm; T max.:100 °C; S:21.4 mm; C:31.85 kN;

N:M16; B:49.2 mm; H1:14 mm; B1:62.7 mm; T max.:200 °C; C:35.1 kN; L1:35 mm; d1:67.2 mm; T min.:-20 °C; J:94 mm;

Fatigue limit load, Cu:0.11 kN; Brand:SNR; D:37 mm; Mass:0.04 kg; r1a max:0.3 mm; d:20 mm; r1s min:0.3 mm; B:9 mm; Max operating temperature, Tmax:120 °C; a:11 mm;

A1:17 mm; J:184 mm; d:76.2 mm; A2:72.8 mm; Weight:7.64 kg; B:74.6 mm; Designation of housing:FC215-; N:19mm; A4:39 mm; C0:49.5 kN;

A4:28 mm; Dz:100 mm; B:43.5 mm; Recommended tightening torque for set screw:8 Nm; Designation of open end cover:SCOU210-30; J:138 mm; G:M6x1; C0:23.2 kN; Designation of housing:FC210N-; N:16mm;

L:203.2 mm; Recommended tightening torque for set screw:3.7 Nm; H:114.3 mm; B:30 mm; T min.:-20 °C; A1:23.4 mm; Designation of housing:PFE206-; A2:34.1 mm; J1:48.5 mm; A:21.1 mm;

A2:48 mm; C0:37.8 kN; B1:55 mm; Adapter sleeve reference:H2310-27; T min.:-20 °C; G:M6x1; A:48 mm; e:16 mm; s1:32 mm; H3:140;

A1:35 mm; A:60 mm; B:45.3 mm; Z:77.7 mm; S:11.8 mm; d:55 mm; Designation of open end cover:SCO211-55; G:R1/8"; T min.:-20 °C; Designation of bearing:US211G2;

Designation of housing:FA210N-; L:115 mm; T min.:-20 °C; s1:25.8 mm; Recommended tightening torque for set screw:16.8 Nm; S:19 mm; L1:94 mm; Weight:2.37 kg; J:157 mm; C:35.1 kN;

s1:34.1 mm; A:21 mm; d:30.16 mm; T max.:100 °C; C0:11.2 kN; N:11,5mm; e:2 mm; A1:9.5 mm; B:36.4 mm; L:125 mm;

C:71.5 kN; N:20mm; A:80 mm; B1:73 mm; L:310 mm; T min.:-20 °C; s1:50 mm; J:236 mm; H2:154 mm; d1:83 mm;